Energy Saver Key Card Switches

Product Details:

We are occupied with offering an extensive scope of unrivaled quality Energy Saving Switch. This switch is composed and fabricated as per the worldwide quality principles by making utilization of top notch crude material and ultra-cutting edge innovation. Likewise, this switch is kept an eye on a few quality parameters to guarantee its impeccable completion.

Other Details:

• Our energy saver switch helps improve your guests' comfort and reduce your energy costs.
• The typical occupancy rate for a hotel is 65%. Of that 65%, a guest is generally in the room only 40% of the time, usually to sleep. This means that there is a significant amount of time when you are needlessly heating, cooling or lighting an unoccupied space.
• Our energy saver acts as the main electrical switch for the room and is operated by the guest’s. All lighting and heating facilities only become operational once a corresponding card is inserted in it's card key switch.
• When the keycard is removed from it's slot, the controlled circuits remain empowered for a further 10-30 seconds to ensure a safe exit from the room before the power is turned off. Our energy saver switch can completely replace traditional energy saving switches.

Additional Information:

• Item Code: EKS

Product Details:

We are recognized as the reliable firm, engrossed in providing of a wide spectrum of Key Card Switch. The offered card switch is used to open and close the lock door. Accessible in vivid sizes, this card switch is manufactured using premium quality basic materials and modern technology under the observation of vendor's deft technocrats.

Features

• Compact design
• Simple functioning
• Easy installation

Main Technical Data

• In accordance with ISO-144434/8 standards
• Lock without a Cable, current using 4 X standard. AA betterks Ind
• Low battery voltage alarm. Longevity of batteries minInwm 2-3 yrs.I
• Emergency cylinder & mechankal key to open the door in case of emergency
• Sectronk door In case of emergency
• Oectronk mortise with anti-panic function & dead bolt bck
• The lock draws the attention of the guest with a subtle alarm if the door Is not properly closed
• Once the lock Is bolted on the nside by the guest, it is visible through the red glowing LED (privacy function)
• Optionally available with wall readerfar control of electric doors and/ or locks
• Optionally available with Intel gent energy control units for switchng
• Current in the hotel room

Other Details

• LED indication and PC isolation material
• Power cut delay after withdraw the card
• EEPROOM ensure the setting data to be kept over 10 years
• Hexadecimal CRC parity bit, with highly accurate data
• Only the authorized card can gain power

Item no

• ES-HF20DA

color for refrence

• Ivory, grey, silver and black

Specifications

• Voltage 50-60 hz 240V +- 10%
• Egress time delay 10-30 seconds
• Load current <16A
• Service life More than 100 thousands times for use while the relay with 220V load
• Operate temperature -10 degree C - 60 degree C
• Operate humidity 50 degree C 10 - 95% RH
• Dimensions W86mmxH86mmxD44mm
• Data speed 106kbit/s

Additional Information:

• Item Code: Mayfair

Product Details:

Hotel Guest Room Energy Saver Key CardsKeycard switches are designed to provide energy savings for the hospitality industry by ensuring that no devices are left on when the room in not in use.These switches control electrical circuits by simply inserting or removing the guest's access card into the device. Both line voltage and low voltage switches are available for application flexibility.

Additional Information:

• Item Code: ECU

Product Details:

Keycard switches are designed to provide energy savings for the hospitality industry by ensuring that no devices are left on when the room in not in use.These switches control electrical circuits by simply inserting or removing the guest's access card into the device. Both line voltage and low voltage switches are available for application flexibility.
Operating the keycard switch is straightforward. Simply insert the access card into the keycard slot to power ON any connected circuits. Removing the access card will initiate a 30 second (HKSWP-0LX and HKSWP-0DX) or 60 second (HKSWP-GDX) time delay, after which the connected circuits will power OFF.

Additional Information:

• Item Code: ECU1

Product Details:

Our organization has viably extended its business in the business sector because of the offered lifted quality exhibit of Energy Key Tag. Also, this item is quality tried on numerous limitations in order to ensure its immaculateness. Our prestigious customers can profit this item at pocket amicable costs.

Features:

• Easy to operate
• Less maintenance
• Energy efficient