T&S Brass Products

Product Details:

8" deck mount mixing faucet with polished chrome plated brass body, 8" swing nozzle with laminar full flow device, ceramic cartridges, lever handles and 1/2" NPT female inlets. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements.

• Pressure: 20 - 125 psi (1.38 bar - 8.62 bar)
• Temperature: 40 F - 140 F (4.44??? - 60???)
• 5.27 GPM @ 60 psi (19.95 L/min @ 4.14 bar)

Product Details:

Easily spray off excess food from your dishes with this UVS SDM wall mounted pre-rinse.

Perfect for busy commercial kitchens, UVS pre-rinse faucet is intended for dishwashing applications. With its convenient features and quick installation, you can improve your workflow for a more efficient cleanup process.

Additional Information:

• Item Code: 5PR-8W12

Product Details:

Clean all of your sink compartments with the excellent reach of this UVS pre-rinse spray valve and hose.

UVS pre rinse spray valve and hose assembly is a perfect replacement for the one that came standard on your pre-rinse faucet. It's even compatible with other popular faucet brands, so you're not limited in your selections.

Product Details:

Having the right pre-rinse setup for your business can improve efficiency in your kitchen and dish room, and make life easier for you and your staff! This model is well-suited for most pre-rinse setups in a restaurant dishroom or warewashing area. It mounts easily to the wall and comes with a host of features to make installation and use as easy as possible, whether you need to replace an old faucet or you're using it on a brand new installation.


Easily spray off excess food from your dishes with this T&S deck mounted pre-rinse faucet with add on faucet.

Perfect for busy commercial kitchens, pre-rinse faucet is intended for dishwashing applications. With its convenient features and quick installation, you can improve your workflow for a more efficient cleanup process.

Product Details:

8" wall mount mixing faucet with polished chrome plated brass body, 18" riser, 44"
flexible stainless steel hose with heat resistant handle, 1.42 GPM spray valve,
compression cartridges with spring checks, lever handles, 1/2" NPT female inlets,
spray valve holder, overhead spring, and wall bracket. Certified to ASME

Additional Information:

• Item Code: B-0133-B

Product Details:

Cost Savings Calculator for Pre-Rinse Spray Valves
Low-flow spray valves conserve water, and that conserving water means saving money. But how much will you save? You might be surprised at the costs you can cut annually by simply switching to one a T&S low-flow spray valves. Stop throwing money down the drain — use our Water Savings Calculator to see what a T&S spray valve could mean for you.
Stream regulator outlet, Series 1
44" flexible reinforced PVC hose w/ heat resistant gray handle and hold down ring
1.42 GPM spray valve
Quarter-turn Eterna compression cartridges with spring checks to prevent cross flow of water
Lever handles w/ color coded indexes
1/2" NPT female eccentric inlets with 2" flanges
Adjustable centers from 7 3/4" to 8 1/4"

Additional Information:

• Item Code: EX-1DP00-H

Product Details:

Open epoxy coated steel hose reel, high flow spray valve with swivel, 3/8" x 35' heavy-duty non-marking hose, ratcheting system, multi-fit bracket, adjustable hose bumper and 3/8" NPT female inlet.

Additional Information:

• Item Code: B-7232-01

Product Details:

Single hole wall mount electronic sensor faucet with polished chrome plated brass body and 4 1/8" rigid gooseneck, 2.2 GPM vandal resistant aerator, AC/DC control module with internal flow control setting switches, temperature control mixing valve with check valves and 18" flexible stainless steel supply hoses with 3/8" compression connections. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9, NSF 372 and UL 1951. Meets ADA ANSI/ICC A117.1 requirements.

• Pressure: 20 - 125 psi (1.38 bar - 8.62 bar)
• Temperature: 40 F - 140 F (4.44℃ - 60℃)
• Water Consumption: @ 10 sec = .37 gal
• 2.20 GPM @ 60 psi (8.33 L/min @ 4.14 bar)

Product Details:

Hose Reel, Enclosed, Epoxy Coated Steel, 3/8"ID x 30' Hose, Spray Valve
Enclosed epoxy coated steel hose reel, high flow spray valve with swivel, 3/8" x 30' heavy-duty non-marking hose, ratcheting system, multi-fit bracket, adjustable hose bumper and 3/8" NPT female inlet

• Enclosed epoxy coated steel hose reel
• Blue high flow spray valve w/ swivel
• 3/8" x 30' heavy-duty non-marking hose rated to 300 PSI
• Ratcheting system holds the length of hose until a slight tug to retract automatically

Product Details:

Open epoxy coated steel hose reel with front trigger brass water gun, 3/8" x 35' hose, ratcheting system, multi-fit bracket, adjustable hose bumper and 3/8" NPT female inlet.

• Open coated hose reel
• Front trigger brass water gun
• 3/8" x 35' hose
• Ratcheting system holds the length of hose until a slight tug to retract automatically
• 3/8" NPT female inlet
• Adjustable hose bumper
• Multi-fit bracket for wall, ceiling or under counter mounting

Product Details:

Easily spray off excess food from your dishes with this UVS SDM deck mounted pre-rinse faucet with add on faucet.
Perfect for busy commercial kitchens, UVS pre-rinse faucet is intended for dishwashing applications. With its convenient features and quick installation, you can improve your workflow for a more efficient cleanup process.

Product Details:

8" wall mount mixing faucet with polished chrome plated brass body, 14" equip swing nozzle with laminar full flow device, ceramic cartridges, equip lever handles and 1/2" NPT female inlets. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements.

• 8" wall mount mixing faucet with polished chrome plated brass body
• 14" equip swing nozzle w/ laminar full flow device
• Quarter-turn ceramic cartridges
• equip lever handles w/ color coded screws
• 1/2" NPT female inlets w/ 2" wall flanges
• Adjustable centers from 7 3/4" to 8 1/4"

Product Details:

8" wall mount mixing faucet with polished chrome plated brass body, swivel outlet (less nozzle), compression cartridges with spring checks, lever handles and 1/2" NPT female inlets. Certified to ASME A112.18.1/CSA B125.1, NSF 61-Section 9 and NSF 372. Meets ADA ANSI/ICC A117.1 requirements.

• Pressure: 20 - 125 psi (1.38 bar - 8.62 bar)
• Temperature: 40 F - 140 F (4.44??? - 60???)
• 28.63 GPM @ 60 psi (108.38 L/min @ 4.14 bar)

Additional Information:

• Item Code: 5F-8WLX00
• Delivery Time: 4 to 5 Days